ACCESSORIES FOR AUTOMATIC VENTILATORS

 

 

AIRPAK50 Mobile Medical Air Compressor 

 

AIRPAK52 Built-in  Medical Air Compressor Module to insert in the trolleys CASTOR DE LUXE

 

 

Application

Anaesthesia / Resuscitation

 

Structure

On   wheels ( AIRPACK 50)  or Built-in in ventilator’s trolley (AIRPACK 52)

 

Capacity at 3.5bar

approx. 40 l/min

 

Electric power supply

220/240 Vac 50-60 Hz

 

Power consumption

270 W (VA)  1.2 A  @  220V

 

Pump

Dry by oscillating piston

 

Reservoir

2,5 liters

 

External connections

Connection for compressed air outlet hose

Connection for compressed air inlet hose of the  eventual central system (in case of air presence in the system, an automatic switch-off  of the compressor occurs) Power supply outlet: SCHUKO type.

 

Weight

25 Kg AIRPACK 50   / 15 Kg AIRPACK 52

 

 

Conformity to Norms

Class 1 Type B

Internationals

Nationals

 

 

Generals

IEC 601-1

CEI 62-5

 

 

 (EMC)

IEC 601-1-2

CEI 62-50

 

Environmental conditions

Temperature from 10 to 40°C Relative humidity from 10 to 90% non condensing

 
 
CASTOR -  Ressuscitation Trolley
CASTOR DE LUXE -  Ressuscitation Trolley with compartment  for built-in medical air compressor

  Catalogue ( pdf , 318 kb)

 

 

Cabinet with two drawers in varnished antiscratch steel with sliding guides and end-scale stop.

It is equipped with a shelf of dimensions 46 x 32 cm and ( only DE LUXE ) compartment for medical air compressor  . Dimensions of each drawer 37 x 29 x 5.5 cm.

Shelf in varnished steel and laminated suitable for resuscitation ventilators housing, dimensions 50 x 40 cm

All around the shelf a 30x10 bar is present as a support for accessories with clamp

Trasportability by 4 pivoting and antistatic wheels diameter 10 cm, two of which with brakes.

Structure

In light anodized ALUMED alloy and varnished steel

Humidifier Support

Predisposed for humidifier housing.

Cyliders holder

Predisposed for insertion of up to a max of 2 holders for cylinders of 5 liters

Dimensions / Weight

50x50x90cm (LxWxH)  / 15kg

 

 

VAPOUR 2  Heated Humidifier

Catalogue ( pdf , 181  kB)

 

Application

Breathing Circuits for anaesthesia, resuscitation

Patients

Adults / Paediatric

Control Modality

Electronic

Measured Parameters

Patient circuit temperature

Regulations

Heating power

Controls

Heating element temperature

Heating Element

Inner diameter 50 mm

Electric power supply

220-240 Vac  -  50 60 Hz

Power consumption

0,5 A  @  220V – 110 W

Safety

Double temperature limit of heating element

Alarm at 40°C on patient circuit temperature with automatic block of heater

User’s Interface

Indications by Led / Control levers and knobs

Standard Accessories

- Temperature probe (code 02002)

- Monopak humidifying bottle with water reservoir (code 0900/N)

Trasportability

Providing for mounting on trolley, stand, etc.

Conformity to Norms

Class 1 Type B

Internationals

Nationals

 

Generals

IEC 601-1

CEI 62-5

 

 (EMC)

IEC 601-1-2

CEI 62-50

Environmental Conditions

Temperature 10 to 40°C – Relative Humidity from 10 tol 90% non condensing

 

 

 

OPTIONAL ACCESSORIES

 

 


*      All accessories for automatic ventilators

ballons, masques, circuit patients, humidificateurs, chariots,  etc.

 

*      Tous les accessoires pour les respirateurs automatiques

bags,  medical air compressors, masks, patient circuits, humidifiers, trolleys, etc.

 

 

 

 

HOME PAGE